Sandy, UT Metal Siding Tough on Weather, Easy on the Eyes
Sandy Siding Company installs durable metal siding for homeowners throughout Sandy, UT and the surrounding valley. Metal panels give your home a strong, modern shell that shrugs off hail, wind, and heavy snow better than almost any other exterior material on the market.
Get your free metal siding quote today, or call now to schedule a walkthrough.
How We Install Metal Siding
Site Inspection and Measurement
Our crew inspects your exterior walls and takes precise measurements to plan panel layout and minimize seams and waste.
Wall Preparation
We check the sheathing underneath for any damage and add a weather-resistant barrier before a single panel goes up.
Panel Installation
Panels are fastened securely using a pattern built to handle expansion and contraction through temperature swings, keeping your siding straight and tight for years.
Trim and Sealing
Corners, edges, and seams get sealed and finished last, closing off every gap where moisture or pests could otherwise sneak in.
Why Homeowners Choose Metal Siding
Metal siding has moved far beyond barns and warehouses. More homeowners now pick steel and aluminum panels for their own houses, and the reasons keep adding up.
Handles hail, wind, and heavy snow without cracking, warping, or rotting
Naturally resists fire, unlike wood or vinyl
Keeps pests like termites and carpenter ants completely out
Reflects sunlight, helping lower cooling costs during hot summer months
Requires almost no upkeep once installed
Lasts several decades longer than many other siding materials
Comes in a range of finishes, including options that mimic wood grain
If you want an exterior that can take a beating from Utah's weather and still look sharp years later, metal siding delivers.
Metal Siding Cost in Sandy, UT
Metal siding installation generally runs $4 to $16 per square foot, with most full-home projects landing between $9,000 and $28,000 depending on the metal type and panel style you choose.
Aluminum panels: $3.50 to $10 per square foot installed — the more budget-friendly metal option, lightweight and easy to work with
Standard steel panels: $5 to $12 per square foot installed — a strong middle ground between price and durability
Premium steel (Galvalume or thick-gauge): $6 to $16 per square foot installed — top-tier durability with the longest expected lifespan
Panel style also affects your final price. Corrugated panels tend to cost less than smooth boards, while standing-seam styles carry a higher installation cost due to the extra labor involved in fitting each seam. We walk you through every option during your free consultation, so you can weigh cost against long-term performance before making a decision.
Steel Siding vs. Aluminum Siding
Steel and aluminum are the two most common metal siding choices, and each comes with its own strengths.
Durability: Steel resists dents and impacts far better than aluminum, since aluminum is a softer metal that can dent from hail or a stray baseball
Lifespan: Steel siding often lasts 40 to 70 years, while aluminum typically lasts 20 to 50 years with proper care
Weight and installation: Aluminum is lighter and easier to install, while steel's added weight usually calls for a professional crew
Rust risk: Steel can rust if the protective coating gets scratched or worn away, while aluminum naturally resists rust in most climates
Cost: Aluminum tends to cost slightly less upfront, though steel's longer lifespan often balances out the difference over time
Sound in storms: Both metals can produce some noise during heavy rain or hail, though proper insulation and solid sheathing behind the panels cut this down significantly
Neither option is the clear winner for every home. We help you weigh your budget, your priorities, and how long you plan to stay in your home before recommending one over the other.
Common Questions About Metal Siding Performance
A few myths tend to follow metal siding around, so let's clear them up.
Will it be noisy when it rains? Not with proper installation. Panels installed over solid sheathing and good insulation perform quietly, and many metal siding systems actually block outside noise better than traditional materials.
Will it dent easily? High-quality steel siding carries a strong impact rating and holds up well against hail and debris. Aluminum is softer and more prone to minor dents, though this is usually cosmetic rather than a structural problem.
Will it rust? Modern coatings and finishes are built to resist rust for decades. Occasional inspection of scratched or chipped areas helps you catch small issues before they spread.
Will the color fade? Quality factory finishes hold their color far longer than older painted metal siding did in the past, though some fading is normal after many years of sun exposure.
Metal Siding Styles and Finishes
Metal panels come in a wider variety of looks than most homeowners expect.
Corrugated panels — a classic wavy profile that offers strong value and a clean, modern look
Standing seam panels — raised seams create crisp vertical lines for a sleek, contemporary appearance
Smooth flat panels — a minimalist finish popular on modern home designs
Wood-grain textured finishes — realistic embossing that mimics the look of natural wood siding
Board and batten style — vertical panel styling for a modern farmhouse look
Color choices range from classic neutrals like charcoal and white to bolder shades like deep green or navy, giving you plenty of room to match your home's personality.
Caring for Your Metal Siding
Metal siding asks very little of homeowners, but a bit of attention keeps it performing at its best.
Rinse panels once or twice a year to clear off dust, pollen, and grime
Check for scratches or chipped coating after major storms, since exposed metal can be more prone to rust over time
Touch up small scratches with a matching paint pen to protect the surface underneath
Trim back nearby branches or shrubs that could scrape against panels during high winds
Frequently asked questions about Metal Siding
How much does metal siding cost?
Metal siding typically costs $4 to $16 per square foot installed, or roughly $9,000 to $28,000 for a full home, depending on whether you choose aluminum or steel and which panel style you select. Aluminum sits on the more affordable end, while premium steel panels cost more upfront but often last the longest.
Is steel or aluminum siding better for my home?
It depends on your priorities. Steel offers stronger impact resistance and a longer lifespan, often 40 to 70 years, making it a smart pick for homes facing frequent hail or heavy weather. Aluminum costs a bit less and is lighter, which can simplify installation, but it dents more easily and typically lasts 20 to 50 years. We can help you weigh both options based on your budget and how long you plan to stay in your home.
Does metal siding make a home noisy during storms?
Not when it's installed correctly. Panels placed over solid sheathing and proper insulation minimize the sound of rain or hail, and many homeowners report their metal-sided homes feel just as quiet as ones with traditional siding. Poor installation without adequate backing is usually the real cause behind noise complaints.
How long does metal siding last?
Metal siding is one of the longest-lasting exterior options available. Aluminum typically lasts 20 to 50 years, while steel can last 40 to 70 years with basic care. Both materials resist rot, pests, and warping far better than wood or vinyl siding.
Does metal siding need to be repainted?
Not usually. Most metal siding comes with a factory-applied finish designed to hold its color for many years without repainting. If you ever want to update the color or touch up a scratch, metal siding accepts paint well, giving you more flexibility than materials like vinyl that can't be painted after installation.
Schedule Your Metal Siding Installation
Give your home an exterior built to handle whatever Utah's weather throws at it. Contact Sandy Siding Company today for a free evaluation and a clear price for your metal siding project.
Call now to book your metal siding estimate in Sandy, UT.
Sandy Siding Company is your trusted local siding contractor serving Sandy, UT and nearby cities like Draper, Murray, and Riverton. From vinyl and James Hardie installation to fast repairs and full replacements, we help homeowners protect their homes and boost curb appeal with quality siding built for Utah's weather.
Office Hours:
Monday - Friday: 7:00 AM - 5:00 PM Saturday: 8:00 AM - 4:00 PM
Sandy, UT 84093